Flood 1G Pastel Base SWF-Solid Wood Finish 250 VOC

The solid color look of SWF-Solid lasts 5+ years and adds rich, opaque color to hide imperfections. Allows the wood texture to show. Performs well on new and weathered wood. Covers the appearance of aging wood. Add our Flood 1G Pastel Base SWF-Solid Wood Finish 250 VOC to your bigpaintstore.com shopping cart for great savings.
Item Number:FLD-14015
Our Price: $50.34
Quantity:

PRODUCT OVERVIEW

  • Provides rich, solid color that allows the wood texture to show through
  • Long-lasting solid stain preserves and protects the beauty of exterior wood
  • Guaranteed 15 years on wood siding and 5 years on wood decks (see product label for limited warranty details)
  • Exclusive formula combines the rich penetration of an oil with the durability of an acrylic resin
  • SWF-SOLID is urethane-enhanced for durability in high-traffic areas
  • Fortified with Flood's exclusive E-B Emulsa Bond to provide superior adhesion to even the most challenging exterior wood surfaces – no primer needed!
  • Resists peeling, blistering and mildew
  • Can be tinted to 51 different stain colors
  • Easy soap and water cleanup

The solid color look of SWF-Solid lasts 5+ years and adds rich, opaque color to hide imperfections. Allows the wood texture to show. Performs well on new and weathered wood. Covers the appearance of aging wood.

VOC: 250
Recommended For
•Exterior use only
•All new or weathered exterior wood
•Flood solid color deck stain can be coated over sound (not peeling), previously coated surfaces, such as a solid stain
•Exterior wooden decks, docks, fences, trim boards, outdoor furniture, previously coated stucco and composites, and weathered vertical masonry
•Exterior wood siding (solid wood and plywood, including T1-11)
Application Tips
•Use proper precautions with highly extractive woods such as cedar and redwood (call us at 1-800-321-3444 for more information).
•New wood has a hard, shiny surface called mill glaze that prevents maximum penetration of a stain — to reduce this mill glaze and remove natural wood chemicals and other factory-applied sealers, treat surface with Flood WOOD STRIPPER (1 quart to 1 gallon of water) to open wood so it can accept a new finish.
•New wood requires time to dry out and open pores before finishing. To test, pour a cup of water on a horizontal wood surface. If it is absorbed into the wood within 30 seconds, it is ready to be finished.
•Before starting, test your color choice on a small area.
•Buy sufficient product for the whole job and intermix all product together before starting to avoid color variance.
•Sand, scrape or wire brush loose, flaking or peeling finishes.
•Pressure wash to remove excess dirt and other contamination.
•Proper surface preparation is essential for the limited warranty to apply — see side of product label for limited warranty details.
•Surfaces must be clean, free of dirt, grime, mildew and loose or peeling coatings before using a Flood Solid Color Deck Stain.
•Weathered, uncoated surfaces: clean with Flood WOOD CLEANER prior to coating.
•To strip previously coated surfaces, remove with Flood WOOD STRIPPER.
•Allow wood to dry 48 hours before finishing.
•If applying with a roller or sprayer, always backbrush.
•Apply between 50° F - 80° F.
•On new wood, two-coat application is recommended.
Available Sizes
•1 gallon
•5 gallon
Coverage
•250 - 400 sq ft/gal (23.2 - 37.2 sq m/gal)
•Coverage will vary depending on the type, age and texture of the wood.
Dry Time
•24 - 48 hours, depending on temperature and humidity.
•Avoid heavy abrasions immediately following application.
VOC
•Does not exceed 250 g/L
Note: Color accuracy will vary based on monitor and printer calibrations. Please visit your local Flood dealer to view actual color samples before making a final color decision.

Download MSDS Sheet Download Technical Data Sheet
You need Adobe Reader to view PDF files.
You can download it for free if you don't have it.
Optional AccessoriesPriceSale PriceQuantity
Merit Pro 7 Piece Kit With Metal Tray $14.18
Quantity:
Flood 1G Pastel Base SWF-Solid Wood Finish 250 VOC
Our Price: $50.34
Close
Our Products

Email Savings + Promo Codes & More Surface Preparation Supplies